Chevy Motor Mounts

BMR Suspension KM008-1, K-member, LS1 Motor, Pinto Rack Mounts, 82-92 F-Body

BMR Suspension KM008-1, K-member, LS1 Motor, Pinto Rack Mounts, 82-92 F-Body
BMR Suspension KM008-1, K-member, LS1 Motor, Pinto Rack Mounts, 82-92 F-Body

BMR Suspension KM008-1, K-member, LS1 Motor, Pinto Rack Mounts, 82-92 F-Body
KM008-1 - K-member, LS1 Motor Mounts, Pinto Rack Mounts. BMR Suspension components are proudly hand Made In USA by American workers in our manufacturing facility near Tampa, Florida.

We cut, bend, notch, drill, weld, mill, powder coat and package all our high quality performance components from American-made DOM and Chrome-Molly steel. Reduce weight, increase frontend rigidity, and swap a modern LS Chevy engine into your F-body with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plates, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.

The K-members are built with provision for either factory or manual steering racks. Designed for street performance, drag race, and road race applications, BMR Suspensions Tubular K-members drop weight and add loads of structural rigidity. The unique K-member design feature integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members.

When combined with BMRs upper and lower A-arms, a minimum weight reduction of over 30 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. BMR Suspensions KM008-1 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours.

Proudly made in the U. NOTE: Not compatible with OE A-arms. Proudly made in the U. These are available in RED or BLACK HAMMERTONE powder coat.

1982 - 1992 Chevrolet Camaro 1982 - 1992 Pontiac Firebird Please see the "Compatibility" link at the top of the listing. Proudly Made in USA By American Workers!

Please wait until we send you an invoice before you pay! When BMR began back in 1998, it was difficult for performance automotive consumers to find suspension products that had an innovative design, quality construction, and an affordable price. BMR turned this market void into a business philosophy and has been serving our customer's needs ever since. BMR Suspension products are proudly made in our manufacturing facility near Tampa.

We cut, bend, notch, drill, and mill our tubular components from American-made DOM and chrome-moly steel. Every product is fixture-welded to maintain consistent quality. We bead-blast our parts and then powdercoat them on our own powdercoating line. Then we assemble and package the products in our assembly department. By manufacturing our products in house, BMR can control the quality at every stage of the manufacturing process.

BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Our past project cars include a 2005 Mustang drag car, a 2004 GTO, a 2005 Mustang street car, and a 1994 Camaro. Our current project vehicles include a 2010 Camaro, 2011 Mustang, and a 1969 Camaro. As if that were not enough, BMR also has a 2009 G8 GT, 1970-1/2 Camaro, 1968 GTO, 1970 Chevelle, 1998 Camaro, and a 2000 Grand Prix GTP.

But it is more than just great vehicles - virtually every BMR employee is a racer or hot rodder as well. This love of racing is demonstrated every day in our customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available. BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser.

BMR product is designed to be used with OEM product and other BMR products. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products.

The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. The item "BMR Suspension KM008-1, K-member, LS1 Motor, Pinto Rack Mounts, 82-92 F-Body" is in sale since Friday, July 08, 2016. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Other". The seller is "bmr_suspension_inc" and is located in Seffner, Florida.

This item can be shipped worldwide.
  • Manufacturer Part Number: KM008-1
  • Interchange Part Number: BMR-KM008-1
  • Other Part Number: KM008-1H, KM008-1R
  • Placement on Vehicle: Front
  • Warranty: Yes
  • Surface Finish: Powder coated
  • Country of Manufacture: United States
  • Brand: BMR Suspension
  • Kit or Single Part: Kit

BMR Suspension KM008-1, K-member, LS1 Motor, Pinto Rack Mounts, 82-92 F-Body