Chevy Motor Mounts

BMR Suspension KM019-1, K-member, Low Mount Turbo, LS1 Motor Mounts

BMR Suspension KM019-1, K-member, Low Mount Turbo, LS1 Motor Mounts
BMR Suspension KM019-1, K-member, Low Mount Turbo, LS1 Motor Mounts

BMR Suspension KM019-1, K-member, Low Mount Turbo, LS1 Motor Mounts
The Leader in High Performance Suspension & Chassis! KM019-1 - K-member, Low Mount Turbo, LS1 Motor Mounts, Pinto Rack Mounts. 1998 - 2002 Chevrolet Camaro 1998 - 2002 Pontiac Firebird. BMR's new low mount turbo K-member provides additional clearance for low-mount turbocharger kits. By redesigning the motor stands this new design provides unobstructed direct air inlet routing to the compressors allowing plenty of room for inlet plumbing or air filters. The motor stands utilize low-profile, high-density polyurethane bushings relocated down low, away from the heat of the turbochargers. We have also revised some of the tube positions on the K-member to provide the most clearance possible around the compressors. Just like our other K-members, it is constructed from DOM steel tubing and 3/16 laser-cut mounting plates for uncompromised strength and durability. This BMR K-Member is both stronger and lighter than the factory stamped steel design and only weighs 28 pounds with motor mounts. Installation time is only 4-6 hours. This model is designed for a manual rack conversion using our extended length Pinto-based rack and pinion kits. These are available in RED or BLACK HAMMERTONE powder coat.

1998 - 2002 Chevrolet Camaro 1998 - 2002 Pontiac Firebird Please see the "Compatibility" link at the top of the listing. Please wait until we send you an invoice before you pay!! When BMR began back in 1998, it was difficult for performance automotive consumers to find suspension products that had an innovative design, quality construction, and an affordable price. BMR turned this market void into a business philosophy and has been serving our customer's needs ever since.

BMR Suspension products are proudly made in our manufacturing facility near Tampa. We cut, bend, notch, drill, and mill our tubular components from American-made DOM and chrome-moly steel. Every product is fixture-welded to maintain consistent quality.

We bead-blast our parts and then powdercoat them on our own powdercoating line. Then we assemble and package the products in our assembly department.

By manufacturing our products in house, BMR can control the quality at every stage of the manufacturing process. BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles.

Our past project cars include a 2005 Mustang drag car, a 2004 GTO, a 2005 Mustang street car, and a 1994 Camaro. Our current project vehicles include a 2010 Camaro, 2011 Mustang, and a 1969 Camaro.

As if that were not enough, BMR also has a 2009 G8 GT, 1970-1/2 Camaro, 1968 GTO, 1970 Chevelle, 1998 Camaro, and a 2000 Grand Prix GTP. But it is more than just great vehicles - virtually every BMR employee is a racer or hot rodder as well. This love of racing is demonstrated every day in our customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available.

BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. BMR product is designed to be used with OEM product and other BMR products.

This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved.

The item "BMR Suspension KM019-1, K-member, Low Mount Turbo, LS1 Motor Mounts" is in sale since Friday, May 30, 2014. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Strut Bars". The seller is "bmr_suspension_inc" and is located in Seffner, Florida. This item can be shipped worldwide.
  • Manufacturer Part Number: KM019-1
  • Interchange Part Number: BMR-KM019-1
  • Other Part Number: KM019-1H, KM019-1R
  • Placement on Vehicle: Front
  • Surface Finish: Powder coated
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Part Brand: BMR Suspension

BMR Suspension KM019-1, K-member, Low Mount Turbo, LS1 Motor Mounts