4pcs Engine Motor Mount For Chevrolet Equinox GMC Terrain 3.6L 2013-2017 AT

Core Functions of an Engine Mount. Anchors the heavy engine to the vehicle's frame, preventing excessive movement.

Uses elastic components (like rubber) to dampen the shakes produced by the running engine. Blocks vibrations from transferring into the cabin and steering wheel, improving comfort and quietness. Signs You Need to Replace an Engine Mount. Excessive Vibration: Steering wheel and car body shake noticeably at idle. Loud Clunk: A "clunk" or "thud" from the engine bay when accelerating or braking.

Engine Movement: Visibly see the engine rocking too much. Physical Damage: Rubber is cracked, collapsed, or leaking fluid. Prepare & Lift:Disconnect battery negative terminal. Use an engine support bar to hold the engine from the oil pan (place a wood block in between). Remove Old Mount:Jack up the front of the vehicle slightly.

Loosen and remove the bolts securing the engine mount. Replace Mount:Slowly lower the engine support until the old mount is loose. Remove the old mount and install the new one. Install & Tighten:Slightly raise the engine to align. Tighten all bolts to the specified torque.

Finish Up:Remove the engine support and jack. The engine is very heavy. Improper operation can cause serious injury or vehicle damage. If you lack experience, proper tools, and strength, it is highly recommended to have a professional mechanic do it. Always work on a flat, solid surface and use jack stands to support the vehicle. Never rely solely on a jack. A5553, A5705, A5707, A5554, A5633. Immediately, we will give a satisfied solution. 4 Pcs Wheel Hub Bearing.

---