
Follow the steps below for some handy tips for replacing engine mounts. Step 1: Check for clearance against the firewall before attempting to raise the engine. Tearing radiator hoses, crimping AC lines or cracking distributor caps should be avoided.
Step 2: Secure the engine on a jack with various blocks of wood. Never jack an engine directly by the oil pan. The pan will bend and rupture.
Step 3: Loosen the engine from the mount bolts. Sometimes a long extension and universal joint is the way to go. Step 4: Next, crawl under the vehicle and loosen the mount-to-frame bolts.
Step 5: Jack-up the engine a little at a time and remove the motor mount. Step 6: Compare the old and new motor mounts. Transfer any heat or drip shields to the new mount. Step 7: Thread in the mount-to-frame bolts before lowering the engine.
This will simplify mount alignment. Step 8: Lower the engine and fully tighten all bolts. Step 9: Front-wheel-drive vehicles often have third "dog-bone" motor mounts. A5385, A3081, A3291, A5374 EM-3109, EM-3081, EM-4158, EM-3086. 3109,3081,4158,3086 Fitment.
A5385- Front Right Motor Mount A3081- Front Left Transmission Mount. No installation instruction included, professional installation is highly recommended!! Our product is easy to install.
Rear Front Left Front Right Center. The information in the notes field will not be read.
The images shown are not the actual item and are for your reference only. OR, you may choose to have a replacement. FEEDBACK IS VERY IMPORTANT TO US.
It is impossible to address issues if we do not know about them!