KM007 - K-member, SBC/BBC Motor Mounts, Factory Steering. BMR Suspension components are proudly hand Made In USA by American workers in our manufacturing facility near Tampa, Florida.We cut, bend, notch, drill, weld, mill, powder coat and package all our high quality performance components from American-made DOM and Chrome-Molly steel. Reduce weight and increase frontend rigidity in your 3rd gen F-body with a K-member from BMR Suspension. BMR K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-members. Manufactured from 1-1/2-inch x 0.120 wall DOM steel tubing and 3/16-inch laser cut, CNC-formed steel plate, BMR Suspension gives you a lightweight, extremely strong K-member. Every BMR K- member is 100-percent bolt-in and requires no modifications for fitment.
The KM007 K- member is designed to be used with the factory steering links. Designed for street performance, drag race, and road race applications, BMR K- members drop weight and add loads of structural rigidity. BMR's unique K-member design features integrated engine mount that replace the heavy factory engine mounts.This additional weight reduction allows BMR to use larger diameter tubing and thicker mounting plates for additional strength over other available K-members. When combined with BMR's upper and lower A-arms, a weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable. This K-member works with your stock engine or you can easily swap to a traditional SBC or BBC engine with no fabrication. BMR Suspension's KM007 K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U. NOTE: Not compatible with OE A-arms.
Proudly made in the U. These are available in RED or BLACK HAMMERTONE powder coat. 1982 - 1992 Chevrolet Camaro 1982 - 1992 Pontiac Firebird Please see the "Compatibility" link at the top of the listing. Proudly Made in USA By American Workers! Hen BMR Suspension began back in 1998, it was difficult for performance automotive enthusiasts to find suspension products that had an innovative design and quality construction at an affordable price.BMR turned this market void into a business philosophy, and has been serving our customer's needs ever since. In a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality. Workers bead-blast parts and then powdercoat them using BMR's in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department. By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process. BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Past project cars include a 2005 Mustang drag car, a 2005 Mustang street car, a 2004 GTO, and a 1994 Camaro. BMR's current project vehicles include a 2019 Mustang GT, a 2016 Camaro, a 2016 Challenger Scat Pack, three 2015 Mustang GTs, a 2011 Mustang GT, a 2010 Camaro, and a 1969 Camaro. As if that were not enough, BMR also has a 2009 G8 GT, a 2008 Trailblazer SS, a 2003 Mach 1 Mustang, a 2000 Grand Prix GTP, a 1998 Camaro, a 1990 Mustang LX, a 1971 Camaro, a 1970 Chevelle, a 1967 Chevelle, and a 1968 GTO. But it is more than just great vehicles-virtually every BMR employee is a racer or hot rodder, as well. This love of racing is demonstrated everyday in BMR's customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available. When performance is a must, rely on BMR Suspension! BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. BMR product is designed to be used with OEM product and other BMR products. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. The item "BMR Suspension KM007 K-member SBC/BBC Motor Mounts Fact Steering 82-92 F Body" is in sale since Wednesday, August 26, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Other". The seller is "bmr_suspension_inc" and is located in Seffner, Florida. This item can be shipped worldwide.