1949-54 Chevy Car Mustang II Independant Front Suspension IFS Crossmember

This is a 1949-54 Chevy Car Mustang II Front Suspension Crossmember. Works with both manual and power rack and pinions. Complete weld-in assembly made from 3/16-inch steel adds strength. Compatible with stock stamped steel control arms as well as tubular control arms. Stock style control arms will require strut rod brackets or tubular strut rod kit.

Rack-and-pinion mounting points rotated rearward 20 degrees for steering shaft clearance. Accepts stock Mustang II spindles or aftermarket drop spindles. One-Piece Shock Cups are T.

Welded in place and have anti-dive built in. This is the strongest design available, with twice the weld area, which will keep your frame from twisting. Note: Lower control arm pivot tubes and corner gussets not included.

---