Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember

Completely bolt in cross member for 1947-54 Chevy 1/2 and 3/4 ton trucks - no welding required. Includes bolt in interlocking frame boxing plates for strength, Full lower A-arms required with this crossmember (strutless type), Requires the use of a power rack and pinion and tubular control arms, Features threaded ride height adjusters for fine tuning vehicle stance. As featured on Classic Trucks Week to Wicked.

Completely bolt in - no welding required. Based on proven Mustang II geometry. Complete with bolt in boxing plates to reinforce the frame. Interlocking design for ultimate strength. Threaded adjusters to fine tune ride height.

Full lower A-arms required with this crossmember (strutless type). Requires the use of a power rack and pinion and tubular control arms.

NOT for use with air ride. Inside dimension at axle centerline is 23-1/2", outside is 28". This frame is slightly tapered to the front. Standard MII spindles will set pin at 1/2" below frame rail and 2" drop will set it at 1-1/2 above.

Track width is standard 56-1/2 depending on which brake kit is used. Includes crossmember, spring towers, threaded adjusters, and mounting plates. By David on May 16, 2021.

This product give me the stability I need in the road. Yes, I recommend this product. By 427 bb chevelle on February 22, 2021. I began installation but after a couple hours of easy installation i realized my kit didnt come as pictured.

Specifically the inside braces had no access holes towards the front as is pictured in instructions and on the install video. I had to cut out the windows to allow access to the inside to install the bolts. This caused an extra couple of hours work and aggravation.

I still think it is a quality product and seems well made. Quality control must have let this one slip through as it doesnt mention having to cut on the new brace anywhere. Inside braces didnt come with access hole cut in. Fit well, great welds and will last. By 1953 Chevy 3600 on September 23, 2020.

Put this in my 1953 Chevy 3600. By Amateur Car Guy on June 19, 2020. Easy to follow instructions and parts are easy to identify.

Problem I had was, sorry to say was the packaging, missing some of the bolts. But easy to put on with only basic stuff you should already have in your garage. Missing some parts but easy to find. Solid parts and easy to follow instructions. Only minor adjustments needed to get it to fit.

By Rocket Man on June 17, 2020. Incredible when you stop and think that this is made for a 70 year old vehicle that has been through who knows what... Amazing that it almost fit without any adjustment... I substituted grade 8 bolts. Would recommend to anyone as the way to go.

Related Items / Suggested Parts. Steel Hex Wrench for Bolt-In Mustang II Ride Height Adjusters. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout.

Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item "Bolt-In 1947-54 Chevy Pickup Mustang II Crossmember" is in sale since Wednesday, February 3, 2021. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Motor Mounts".

The seller is "speedway_motors" and is located in Lincoln, Nebraska. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Brand: Speedway Motors
Manufacturer Part Number: 91044754
Material: Steel
Mounting Hardware Included: Yes
California Prop 65 Warning: True