Hooker Blackheart 71221029HKR Engine Mount Brackets

71221029HKR Hooker BlackHeart Engine Mount Brackets. The new Hooker BlackHeart LS Swap Engine Mounting Brackets are designed to be used with BlackHeart Transmission Crossmembers P/N's 71222020HKR, 71222019HKR, or 71222018HKR for a trouble free install with optimized driveline angles.. Installation of these brackets requires the use of new stock OE 4th-gen F-body LS engine mounts (ex: GM 22179268 or Anchor 3064) or aftermarket polyurethane inserts Prothane 7-512 or Energy Suspension 3-1151 Compatible with Holley Accessory Drive System P/N 20-136 or equivalent in all spacings. This engine swap mounting bracket kit requires the use of a Holley LS Engine Swap Oil pan (choose from 302-1, 302-2, 302-3, and 302-5). 302-1 has the largest capacity, but least clearance, while the 302-3 and 302-5 have the most clearance (with the 302-5 being cheaper due to its lack of turbo drain-back holes/plugs). Designed to simplify LS engine swaps into 82-04 S-10 and Sonoma 2WD trucks, replicating the factory engine/transmission inclination angle. For use with Hooker BlackHeart Transmission Crossmember P/N's 71222020HKR, 71222019HKR, or 71222018HKR for a trouble free install. Compatible with Holley Accessory Drive System P/N 20-136 or equivalent in all spacings. Compatible with Holley Oil Pan P/N 302-1. Easy installation with no fabrication necessary. 100% quality hand-welded construction for strength, longevity and good looks.

Installation of these brackets requires the use of new stock OE 4th-gen F-body LS engine mounts (ex: GM 22179268 or Anchor 3064) or aftermarket polyurethane inserts Prothane 7-512 or Energy Suspension 3-1151. So we have a chance to make it right - we want your repeat business! Check out the official Holley Performance.

---