Universal Steel Motor Mounts Biscuit Style 3 Bolt Weld In Chevy SBC BBC 283-502

Universal Steel Motor Mounts Biscuit Style 3 Bolt Weld In Chevy SBC BBC 283-502. Biscuit Style Universal Motor Mounts Chevy 3 Bolt LT 283-502 Steel. Universal Biscuit style universal steel motor mounts for Chevrolet 3 bolt Generation 1 - LT motors. Fits 283-350 SBC and 396-454 BBC. "Weld-in" Design great for hot rods, dune buggies or custom V8 engine conversions.

These universal fit, Street Rod style biscuit universal motor mounts allow for maximum flexibility in design with lots of holes for maximum mounting options. MADE FOR US LOCALLY - IN THE U. Chevy 283-350 Small Block with 3-Bolt motor mount pattern on block. Chevy 396-502 Big Block with 3-Bolt motor mount pattern on block.

Chevy LT-1 Motor with 3-Bolt motor mount pattern on block. 3 bolt mount attaches to the motor, comes black powder coated. Frame mount can be shaped to fit frame and must be welded to frame, comes raw steel.

Frame mount can be welded in the up or down position, allowing for more height combinations. Biscuits fits both sides of the mount plate. Measurement from the far hole on the triangle, to the last hole at the end of the bracket = 6.25. Motor mount reach, with the rubber mount in both bracket holes, making both brackets as far apart as possible.

It would reach approx 10 end to end, this being measured from the bottom edge of the block bracket to the far edge of the weld on mount bracket. 2.5 Diameter [round part]. A: Bottom Edge of Motor Plate to Center of First Hole - 4.0. B: Bottom Edge of Motor Plate to Center of Second Hole - 5.0. C: Bottom Edge of Motor Plate to Center of Third Hole - 6.0.

D: Bottom Edge of Motor Plate to Center of Fourth Hole - 7.0. E: Frame Side of Weld on Plate, to Bolt Center, Close Side, First Slot - 1/2. F: Frame Side of Weld on Plate, to Bolt Center, Far Side, First Slot - 1-1/4. G: Frame Side of Weld on Plate, to Bolt Center, Close Side, Second Slot - 2-1/8.

H: Frame Side of Weld on Plate, to Bolt Center, Far Side, Second Slot - 2-7/8. Max Distance, From the Bottom of the Motor Plate to the Frame, Apprx 10. Powered by SixBit's eCommerce Solution.

---